All of our wood
wagon wheels, cannon
wheels, and carriage
wheels are hand crafted and quality made from the
finest USA hardwoods. Our wood
wagon wheels, cannon
wheels, and carriage
wheels are made with solid steam-bent hardwood
construction and hardwood spokes.
All of our wood wagon
wheels have forge shrunk steel rims, rubber can
be applied to most of our wagon
wheels. Our wood
wagon wheels are not only authentic wagon
wheels that are use on our wagons, they can be
used to add that rustic, country, or western decor to any
room or landscape. These are the same wood
wagon wheels
that we use for our wagon
wheel chandeliers.
Wagon
Wheel Hubs, like Wheel
Hubs, come in all size and shapes, we have designed
this information page on Wagon
Wheel Hubs to assist you in determining the type
of Wagon
Wheel Hubs and the wagon
wheels to use for your project. We can custom build
any size Wagon
Wheel Hubs or and of our wagon
wheels to meet your needs.
ALL ABOUT WAGON WHEELS:
Wagon
Wheel consists of four main parts, the tire, felloes,
spokes, and hubs.
WAGON WHEEL FELLOES:
The normal felloes width on
our Wagon
Wheels range from 1" 1 1/2". We can custom
make the width on any of our Wagon
Wheel to match the needs of your project. The width
and depth of the felloe must remain in proportion. A 2"
wide fellows should have a 1 1/2 - 2" depth.
WAGON WHEEL TIRES:
There are three types of tires
on our Wood
Wagon Wheel, forge shrunk steel tires, flat rubber
tires, and rolled rubber tires. We can place any type tire
on any of our Wagon
Wheels to fit your project needs.
WAGON WHEEL SPOKES:
Our Wood
Wagon Wheel have 8, 10, 12, 14, or 16 spokes depending
on the size of the wheel and what the wheel will be used for.
The number of spokes must be in relationship to the size of
the Wagon
Wheels.
WAGON WHEEL HUBS:
 |
Rubber, flat or rolled,
can be added to any of the Wagon
Wheels we make. Rubber not only makes less
noise on pavement than steel tires, the wheel rolls
better which makes it easier to pull. Rubber will last
for 2000 -4000 miles before having to be replaced, depending
on surface and conditions. Adding rubber will increase
the wheel size by approximately 2" please allow
for the increase when ordering Wagon
Wheels. If you add rubber to a 32" wheel,
it will be 34" after the rubber.
|
WAGON WHEEL HUBS:
Wagon Wheel Hubs can be as varied
as the number of spokes on wagon wheels. We can custom build
any size wood hub to meet your wagon wheel project needs.
Solid Wood Hub |
Wagon Wheel Wood Hub
for an original wooden wagon wheel look and light to
heavy use. Wood hubs can be used with boxing or oil
soaked brass inserts. We offer a large selection of
wood hubs in all sizes.
We build our hubs from
select Ash.
Weight limit on wood hubs
depends on the size of the wagon wheels and hubs.. We
can also custom build any size wood hub to meet your
project needs.
|
|
Steel Carriage Hub |
Bolt Carriage Wheel
Steel Hub used on Amish Buggies and Carriages around
the world, 16 spokes.
When used with bearings,
the hub and wheel can be used for medium to light heavy
duty and on-road use.
Weight limit on Bolt
Carriage Wheel with steel hubs and bearings, 500 - 700
lbs per wheel.
|
|
Steel Carriage Hub |
HEAVY DUTY Bolt
Carriage Wheel Steel Hub, everything about this
wheel is heavy duty, larger spokes and 1 1/2 - 3 inches
wide felloes, 16 spokes.
When used with bearings,
the hub and wheel can be used for heavy duty and on-road
use.
Weight limit on Heavy
Bolt Carriage Wheel with steel hubs and bearings, 750
- 1000 lbs per wheel.
|
|
Sealed Bearing |
Sealed Bearing Carriage
Wheel Steel Hub is a scaled down version of our
large Carriage Wheel. Designed to be used on miniature
horse carts, venders carts, and antique autos. This
wheel comes with (2) 3/4 or 5/8" i.d. sealed bearings.
Weight limit on Sealed
Bearing Carriage Wheel Hubs, 500 lbs per wheel.
|
|
Aluminum Solid Hub |
Wagon Wheel Aluminum
Solid Hub for light off-road and ornamental use.
For light use, wheel must have oil soaked brass insert
in bore, 12 spokes.
This hub is ideal for
venders carts.
Weight limit on Aluminum
solid cast hubs, 500 lbs per wheel.
|
|
Aluminum Split Hub |
Wagon Wheel Aluminum
Split Hub for very light off-road and ornamental
use. For very light use, wheel must have oil soaked
brass insert in bore, 10 spokes.
Weight limit on Aluminum
Split Hubs, 250 lbs per wheel.
|
|
Wagon Wheel Hubs and spokes
can be mixed for any type of combination to fit your Wagon
Wheel project, Contact
Us.
We manufacture our products,
we do not have a retail store so all of our products are sold
via the internet. Please contact us before you plain a visit.
Should you have questions concerning any of our services or
products, please contact us.
|
